Lee Case Length Gauge and Shellholder 30-30 Winchester

ID: 90136   UPC: 734307901363

View More Items by: Lee

$10.99

This product is out of stock.

Notify me when back in stock







  • Product Information
  • Review

Product Information

The Lee Case Length Gauge is a precise and easy way to trim brass cases to length and square the case mouth. Requires a Lee Cutter and Lock Stud to function.

The first step to successfully trimming brass cases with the Lee Case Length Gauge and Shellholder is to take the Lee Lock Stud (sold separately) and screw it into the shell holder. Next the Length Gauge needs to be screwed into the Case Trimmer Cutter (sold separately). The length gauge is set to cut each case within specifications. After the tools are screwed together the next step is case trimming. Just put the empty brass into the shellholder, insert the case length gauge into the empty piece of brass and turn the cutter until the piece of brass is trimmed to the predetermined length. It is that easy to get consistent case lengths and square case mouths helping to keep reloaded ammunition as accurate as possible.

Material: Steel
Caliber: 30-30 Winchester

Features: Caliber specific Shellholder and length gauge

Notes: Cutter and Lock Stud (476-992) Sold Separately
Special Note: The Large Cutter and Lock Stud (153-052) is required for .475 and larger calibers (Sold Separately)

Review

Write a Review
Very Poor Poor Average Very Good Excellent

Are you a robot?
What is the sum of 3 and 7:
Overall Rating
0.0/5.0 (Based on 0 Review)


No reviews have been written for this product.
Be the first one!